iNELS Air - IoT devices
Pulse converter - AirTM-100L
Coming soon - this product has not yet been released for sale.
The Pulse converter counting quantities of pulses from the energy meters (electricity, water, gas).
The Pulse converter is designed for use on existing gauges even without impulse output „S0“ (gauge must support sensing).
AirTM-100 converts gauge consumption using sensors - LS (LED sensor), WS (magnetic sensor for water meter), MS (magnetic sensor) or pulse output.
For each power meter it is necessary to have one Pulse converter AirTM-100.
With the wireless solution and Sigfox / LoRa / NB-IoT communication, it can communicate instantly to your chosen location and be operated immediately.
Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or
Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
Power supply: 5-12 V DC or 1x 3.6 V batteries SAFT with approx. 5 years (depending on the frequency of use).
In the case of external power, the battery is automatically disconnected and serves as backup power.
Protection degree IP65
Battery power: 1x 3.6V LS 14500 Li-SOCl
External power supply: 5 – 12 V DC (on terminal)
Standby consumption: 0.2 mW
Setting: With a message from the server using setting pins, SET button, programming cable
Alarm Detection: message to the server
Transmitter frequency: 868 MHz
Range in open space: Approx. 10 km (Depending on network coverage)
Working temperature: -30…+60°C (Pay attention to the operating temperature of batteries)
Operating position: any
Mounting: glue / screws
Protection degree: IP65
Dimension: 136 x 62 x 34 mm
Weight: 100 g (without battery)
Format: pdf | Size : 79 kB | 06. 08. 2021
Manual multilanguage AirTM-100
Format: pdf | Size : 1 MB | 06. 08. 2021
UK Sales Team