Wired electroinstallation iNELS (BUS)
Power supply PS3-100/iNELS
Power supply 100 W
Available while stocks last.
PS3-100/iNELS is a stabilized switching power supply, with the total power of 100 W.
Used to supply central units and external master within intelligent electro-installation iNELS.
Through BUS separators from the supply voltage
, it supplies BUS lines from which iNELS peripheral units are also powered.
Used in the instrumentation field.
Fixed output voltage DC 27.6 V and DC 12.2 V, galvanically isolated from the mains.
Power source of 27 V and 12 V have a common ground terminal GND.
Electronic short circuit protection, high-capacity and thermal overload, over voltage.
UPS functions - backup of output 24V and 12V on connected batteries.
Recharging the batteries from 27 V source.
Protection battery backup fuse - protection against short circuit and reverse polarity battery.
Continuously adjustable maximum battery charging current.
Indication of operating and fault conditions 6 LED diodes on the front panel of the power supply.
2 STATUS outputs with open collector for reporting operational status of the source.
Source supplies power to the priority system iNELS, the remaining power is used for rechargeable batteries.
When the battery is fully discharged, the battery is automatically disconnected from the load.
PS3-100/iNELS in 6-MODULE version is designed for mounting into a switchboard, on DIN rail EN60715.
Output: 27.6 V / 3.6 A, 12.2 V / 0.35 A
Supply voltage (frequency): 100-250 V AC (50/60 Hz)
Dimensions: 90 x 105 x 65 mm
Datasheet PS3-100 iNELS
Format: pdf | Size : 211 kB | 04. 12. 2023
EC Declaration of conformity PS3-100-iNELS
Format: PDF | Size : 333 kB | 04. 12. 2023
Manual multilanguage PS3-100 iNELS
Format: pdf | Size : 929 kB | 04. 12. 2023
+44 1626 886 342
UK Sales Team
+44 7719 321 186