Hotel Wireless Retrofit iNELS (HRESK)
Switches and Dimmers
Ligting control unit with pair detectors and external button input RFSAI-161B
Lighting control unit with detectors
8595188149341 (230V) |
Switch component with one output channel which is used in combination with detectors for automatic lighting control.
RFSAI-161B has a pre-set control algorithm (scene) adapted to the requirements of hotel room control, see wiring.
Each RFSAI-161B can be programmed with 1x RFMD-100, 1x RFWD-100 and 1x wireless controller (RFWB-40/G or RF KEY).
The terminals on the component give you the opportunity to connect a wired detector or an existing key installation.
It enables connection of the switched load up to 1x 12 A (3000 VA).
The programming button on the unit is also used for manual control of the output.
Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2
Output: 1x NO, 12 A
Supply voltage (frequency): AC 230 V (50/60 Hz); AC 230 V (50/60 Hz)
Dimensions: 49 x 49 x 21 mm
Format: pdf | Size : 157 kB | 04. 12. 2023
EC Declaration of conformity RFSAI-161B
Format: pdf | Size : 48 kB | 04. 12. 2023
On-wall button controller
PLASTIC - 4 buttons
On-wall button controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
Motion detector RFMD-100
The motion detector PIR is used to detect persons moving inside the building interior.
Window / Door detector
The Window/Door detector is used to detect opening where activation occurs when the magnet and the sensor become separated.
+44 1626 886 342
UK Sales Team
+44 7719 321 186