On-wall button controller
PLASTIC - 4 buttons

Wireless wall controllers
4 buttons

EAN: 8595188140607 | Code: 8098 (white)
EAN: 8595188191623 | Code: 9162 (black)


  • On-wall button controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
  • RFWB-20/G: two buttons enable control of two units independently.
  • RFWB-40/G: four buttons enable control of four units independently.
  • The flat design with level base makes it ideal for fast installation on any surface (fixation with adhesive or screws in the installation box).
  • When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF/ON, blinds up/down).
  • Sending a command is indicated by a red LED.
  • In LOGUS90 switch frame design (plastic, glass, wood, metal, stone).
  • Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
  • Battery power supply (3 V CR 2032 battery - included in the supply) with battery life of around 5 years based on frequency of use.
  • Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO2.
  • RFWB enables communication (RFIO2) and can thus communicate with the CU3-02M.



  • Number of channels: 4
  • Power supply: 3 V battery CR 2032 
  • Design: LOGUS90
  • Colour: in LOGUS90 variations 
  • Dimensions: 85 x 85 x 16 mm 
  • Protocol: RFIO2


Customer Centre

Technical support for the UK

+44 01626 912 407

Sales Team

+44 01626 886 342
+44 07719 321 186