About us
Products
Solution
Download
Contacts
About us
Products
Solution
Download
Contacts
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
Products
Wired electroinstallation iNELS (BUS)
Back
Wired electroinstallation iNELS (BUS)
Central units
System units
Switching Actuators
Dimming actuators
Input units
Converters
Wall controllers
Application
Sensors and detectors
Combined units
Accessories iNELS
Third-party integration gateway - iNELS Bridge
iNELS Bridge works as a gateway for connecting third party devices and integrating them into the iNELS environment
Product detail
Central unit with 1x BUS, 1x MODBUS - CU3-10M
Product detail
Dimming actuator for RGBW strips - DA3-03M/RGBW
Product detail
Room controller with DALI dimmer - RC3-610M/DALI
The RC3-610M/DALI is an I/O actuator equipped with 6 binary inputs, of which 2 can be confi gured as temperature inputs and 8 independent relays with switching potential-free and potential contacts. It also includes two analog outputs 0(1)-10 V with a load capacity of up to 10 mA.
Product detail
Central unit with 1x BUS, 1x DALI - CU3-09M/DALI
CU3-09M is one of the basic system control units of iNELS BUS istallations.
Product detail
Central unit with 2x BUS - CU3-08M
CU3-08M is one of the basic system control of iNELS BUS installations
Product detail
External master BUS with Ethernet communication MI3-02M/ETH
The external master MI3-02M/ETH enables the expansion of the number of connected iNELS3 peripheral units to the central unit CU3 by another two branches of the installation BUS (by 2x 32 peripheral units).
Product detail
Central unit with 1x BUS, 1x EBM - CU3-07M
CU3-07M is one of the basic system control units of iNELS BUS installations.
Product detail
Wall card reader WMR3-21
Wall-mounted card reader that is designed for read contactless media (smart cards, key chains, etc.)
Product detail
Glass room thermo-regulator GRT3-50/W
Glass room thermo-regulator GRT3-50 is part of a comprehensive range of glass iNELS control units for guest room management system (GRMS) and serves to regulate the temperature in the room.
Product detail
Glass wall card reader
GMR3-61/W
Wall RFID card reader GMR3-61 is designed for reading of contactless media
Product detail
Power supply PS3-30/iNELS
PS3-30/iNELS is a stabilized switching power supply, with the total power of 30 W.
Product detail
Glass door bell GDB3-10/W
Glass info panel GDB3-10 is part of a comprehensive series of glass iNELS control units for guest room management system
Product detail
Glass switch button with symbols GSB3-60/SW
Glass touch controllers with symbols GSB3-20/S, GSB3-40/S and GSB3- 60/S are part of a comprehensive range of glass iNELS control units and can be advantageously used in all projects for example as a part of guest room management system (GRMS).
Product detail
Glass switch button with symbols GSB3-40/SW
Glass touch controllers with symbols GSB3-20/S, GSB3-40/S and GSB3- 60/S are part of a comprehensive range of glass iNELS control units and can be advantageously used in all projects for example as a part of guest room management system (GRMS).
Product detail
Glass card reader GCR3-11/W
Glass RFID card reader GCR3-11 is part of a comprehensive range of glass iNELS control units.
Product detail
Switching actuator without control and indication components, 22-channels EA3-022M
Actuator for controlling light circuits, appliances, thermo drives and 1 shutter (2 relays with blocking). Unit is equipped with 20x switching outputs and 1x changeover contact for controlling blinds or shutters.
Product detail
Converter RS485/232-iNELS eLAN-RS485/232
RS485/232 signal converter to TCP / IP protocol for communication with devices via Modbus RTU protocol.
Product detail
Roller (shutter) actuator, 18-channels JA3-018M
JA3-018M is an actuator designed to control roller shutters, blinds, awnings, garage doors, entrance gates.
Product detail
Fan Coil Control Actuator FA3-612M
FA3-612M is a unit (actuator) designed to control fan coil units.
Product detail
Glass switch button GSB3-80/W
The wall controller with touch controls series GSB3 is a design element (controller) in the system iNELS with elegant and comfortable control.
Product detail
Dimmer Actuator, 6-channel DA3-66M
DA3-66M is a universal dimmer six-channel actuator to control the brightness.
Product detail
Switching Actuator, 22-channels SA3-022M
SA3-022M is an expansion module for the CU3-04M central unit.
Product detail
Glass Bedside Panel
GBP3-60/W
Glass Panel with 6 buttons and power sockets
Product detail
Luminescence sensor DLS3-1
The luminescence sensor DLS3-1 is for sensing the current luminescence at the point of installation of the unit.
Product detail
Combined motion, temperature, humidity and light intensity detector DMD3-1
DMD3-1 is a combined detector for ceiling mounting.
Product detail
PIR motion detector JS-20 "LARGO"
JS-20 process signal by method of multiple analysis of signal.
Product detail
Broken glass detector GBS-210 "VIVO"
Glass breaking detector GBS-210 serves to guard glassed areas and detects their destruction.
Product detail
Heavy-duty magnetic detector SA-220
SA-220 is used fro big metal gates with wire outlet in armored opening.
Product detail
Gas detector GS-133
GS-133 detects all types of flammable gases (coal gas, propane, butane, cetylene, hydrogen, … ) and reacts in two levels of concentration.
Product detail
Interior siren SA-913TM
Heavy-duty siren SA-913 TM with piezoelectric membrane is used as an acoustic device in interior and exterior of the protected object.
Product detail
External siren - OS-365
It is a backed-up siren with in-built NiCd accumulator. All siren functions are managed by a microprocessor.
Product detail
iHC-TI - application to iPAD
This application is free to download on AppStore.
Product detail
iHC-MI - application to iPHONE
iNELS Home Control (iHC) is an application for controlling iNELS system and integrated technologies.
Product detail
iHC-TA - Application for tablets
iNELS Home Control (iHC) is an application for controlling iNELS system and integrated technologies.
Product detail
iHC-MA - Application for smartphone
iNELS Home Control (iHC) is an application for controlling iNELS system and integrated technologies.
Product detail
Glass switch button GSB3-60/W
The wall controller with touch control series GSB3 is a design element (controller) in the system iNELS3 with elegant design and comfortable controlling. Controllers are available in black (e.g. GSB3-40/B) and white (e.g. GSB3-40/W) variants.
Product detail
Glass switch button GSB3-40/W
The wall controller with touch controls series GSB3 is a design element (controller) in the system iNELS with elegant and comfortable control.
Product detail
Glass Bedside Panel GBP3-60/W
Glass Panel with 6 buttons and power sockets
Product detail
Glass Bedside Panel GBP3-60/B
Glass Panel with 6 buttons and power sockets
Product detail
Digital room thermo-regulator IDRT3-1
With IDRT3-1 the circuit heating/cooling can be corrected to within ± 5°C, or you can enter the desired temperature in the room in absolute value.
Product detail
Control unit with touch screen EST3
The control unit with touch screen EST3 is a suitable control element of the iNELS system in places where it is necessary to control multiple devices.
Product detail
Analog-digital converter ADC3-60M
Analog inputs are used to connect analog sensors that generate a voltage or current signal.
Product detail
Digital-analog converter DAC3-04B
DAC3-04B is converter of a digital signal to an analog voltage signal.
Product detail
Digital-analog converter DAC3-04M
DAC3-04M is a converter from a digital signal to an analog voltage signal
Product detail
Temperature input, 4-channels TI3-40B
These units are designed for connection of one (TI3-10B) to four (TI3-40B) external temperature sensors.
Product detail
Temperature input, 1-channel TI3-10B
These units are designed for connection of one (TI3-10B) to four (TI3-40B) external temperature sensors.
Product detail
Temperature input, 6-channels TI3-60M
Unit TI3-60M is designed to connect up to six external temperature sensors.
Product detail
Binary inputs unit IM3-80B
Binary input units IM3-40B and IM3-80B are used for connection of 4 or 8 devices with potential-less contacts (switches, buttons, switches of other design, PIR detectors, fi re and gas detectors, etc.).
Product detail
Binary inputs units IM3-20B, IM3-40B
Binary input units IM3-20B, IM3-40B and IM3-80B are used for connection of 2, 4 or 8 devices with potential-less contacts
Product detail
Binary input unit, 14-channel IM3-140M
Binary input unit IM3-140M is designed to connect up to 14 devices with potentialless contact (such as switches, buttons of other designs, fi re and glass detectors and others).
Product detail
Dimming actuator for LED sources, 3-channel DCDA-33M
DCDA-33M is a dimming unit designed to dim single-color and RGB LED light sources controlled by variable current.
Product detail
Dimming actuator for electronic ballasts, 2-channel LBC3-02M
LBC3-02M is an analog two-channel actuator designed to control dimmable ballasts of fl uorescent lamps or other light sources controlled by signal 0(1) - 10 V DC.
Product detail
Universal dimming actuator, 2-channels DA3-22M
DA3-22M is a universal dimming 2-fold actuator enabling control of brightness intensity of dimmable light sources of the type ESL, LED and RLC with power supply 230 V.
Product detail
Roller (shutter) actuator, 2-channels JA3-02B/DC
JA3-02B/DC actuator serves to control blinds, shutters, garage doors, entrance gates, etc.
Product detail
Switching actuator, 2-channels SA3-02B
Actuators are designed for switching of one (SA3-01B), respectively two (SA3-02B) of various appliances and loads relay output (potentialless contact).
Product detail
Weather station - GIOM 3000
Power supply by PoE (splitter included).
Product detail
Switching actuator, 1-channel SA3-01B
Actuators are designed for switching of one (SA3-01B), respectively two (SA3-02B) of various appliances and loads relay output (potentialless contact).
Product detail
2N Helios IP Vario, 3x2 buttons + camera + keyboard
2N® Helios IP Vario is a door intercom, which perfectly combines top technology with unique design.
Product detail
2N Helios IP Vario, 3x2 buttons + camera + keyboard + display
2N® Helios IP Vario is a door intercom, which perfectly combines top technology with unique design.
Product detail
2N Helios IP Vario, 3x2 buttons + camera
2N® Helios IP Vario is a door intercom, which perfectly combines top technology with unique design.
Product detail
2N Helios IP Uni, 2 buttons
2N ® Helios IP Uni seems to be very simple at first sight, but thanks to its capabilities it is very interesting door communicator for easy installation.
Product detail
Switching actuator, 12-channel SA3-012M
The actuator is designed for switching to twelve various appliances and loads with potentialless contact.
Product detail
Switching actuator, 6-channels SA3-06M
The actuator is designed for switching up to six various appliances and loads with potentialless contact.
Product detail
Switching actuator, 4-channels SA3-04M
It serves for switching of various appliances and loads with potentialless contact.
Product detail
Switching actuator, 2-channel SA3-02M
Actuator SA3-02M is designed for switching two various appliances and loads with potentialless contact.
Product detail
Gateway iNELS - DALI/DMX EMDC-64M
The unit EMDC-64M is designed to control DALI electronic ballasts and DMX receivers from the iNELS system.
Product detail
GSM communicator
GSM3-01M
It serves for communication with the iNELS system via commands sent in short SMS messages from mobile phone GSM.
Product detail
External master BUS MI3-02M
External master MI3-02M provides expansion of the amount of units iNELS3 connected to the central unit CU3-01M or CU3-02M for 2 times 32 units.
Product detail
BUS separator from power supply BPS3-02M
Units BPS3-01M and BPS3-02M serve for impedance separation of BUS from supply voltage power.
Product detail
BUS separator from power supply BPS3-01M
Units BPS3-01M and BPS3-02M serve for impedance separation of BUS from supply voltage power.
Product detail
Wall switch button, 4 buttons WSB3-40
Wall controllers with low-upstroke control (line) WSB3 are the main and most frequently used units (controller) in the iNELS system.
Product detail
Wall switch button, 2 buttons WSB3-20
Wall controllers with low-upstroke control (line) WSB3 are the main and most frequently used units (controller) in the iNELS system.
Product detail
Glass Switch Panel GSP3-100/W
Glass Switch Panel with customizable symbols, 10 buttons
Product detail
Elko Hotel Touch screen EHT3
Touch Screen Panel With 3.5" Display
Product detail
Bedside panel GBP3-60
Bedside panel with the customizable configuration
Product detail
Power supply PS3-100/iNELS
Power 100 W, inputs for connecting backup batteries 2x12 V and the possibility of recharging them with adjustable current.
Product detail
Ethernet-IR transmitter eLAN-IR-003
Smart box for controlling audio-video devices through your smartphone - eLAN-IR-003
Product detail
Glass Switch Panel
GSP3-100/B
Glass Switch Panel with customizable symbols, 10 buttons
Product detail
Content section
Central units
System units
Switching Actuators
Dimming actuators
Input units
Converters
Wall controllers
Application
Sensors and detectors
Combined units
Accessories iNELS
Customer Centre
Technical support
+44 1626 886 342
UK Sales Team
+44 7719 321 186
More contacts